This kitchen project involved fitting a new worktop and carefully preparing the cut-outs for both the sink and the hob.
The installation started with the kitchen base units prepared and ready for fitting. From there, the worktop sections were measured, positioned and joined properly before the sink and hob openings were marked out and cut. Care was taken throughout the process to make sure the worktop fitted neatly, the joints were accurate and the final finish looked clean and well aligned.
Projects like this are not just about placing a worktop on top of cabinets. Good preparation, accurate cutting and neat fitting all make a big difference to the final result. When done properly, the worktop should look clean, sit correctly and provide a practical finish for everyday kitchen use.
The completed installation gave the kitchen a much more finished and modern appearance, with the sink and hob fitted neatly into the new surface.
Before: kitchen base units in place before the new worktop was fitted and cut for the sink and hob.
Work in progress: kitchen worktop prepared for joining during the installation process.
Work in progress: kitchen worktop prepared for the sink cut-out during installation.
After: completed kitchen worktop installation with the hob fitted neatly into the new surface.
After: completed kitchen worktop installation with the sink and hob fitted into the new surface.
If you need help with kitchen worktop fitting, sink cut-outs, hob cut-outs or other kitchen improvement work, feel free to get in touch.